Acid Wash Filter Elements for SCR

 

Selective catalytic reduction (SCR) Acid Wash filters

Acid Wash (AW) filter elements capture the excess ammonia that could be introduced into the sample stream. Because this scrubbing is made by a chemical bond between the ammonia (NH3) and the acid washed (Phosphoric) the filter elements enhance the protection of sensitive equipment.
Protect your analyser from ammonia residue.
Measurement of NOx in the presence of ammonia.

Selective catalytic reduction (SCR) is a means of converting nitrogen oxides, also referred to as NOwith the aid of a catalyst into nitrogen (N2) and water (H2O).

Standard Acid Wash Filter Element Sizes

You will not need a new filter housing installation is required as our AW filter elements are based on industry standard sizes so you can install them into existing filter housings already in service. In addition, if you need custom sizes these can also be supplied for your own housings.

How to Order

Our Acid Wash filters elements are available from stock. Add the suffix .AW to the S type filter element part number.

For more information about our AW filter elements or to discuss your application in more detail please call us on +44 (0)1634 724224 or send us an email to [email protected]

 

Leave a Reply