PEFTEC Show, Antwerp, Belgium – 18th & 19th November 2015

ByDavid Janes

PEFTEC

Classic Filters will be exhibiting our range of products suitable for sample systems and other analyser applications at the PEFTEC Show in Anterwep, Belgium on the 18th & 19th November 2015. Visit our stand number 9 to discuss your filter applications.

PEFTEC Floor Plan

You can register here: www.peftec.com/visitor/

OEMs and end-users will have the perfect opportunity to network, source and compare products, discuss applications and technology with colleagues and other industry experts.

TOPICS BEING COVERED INCLUDE:

Topics and products featured at PEFTEC 2015 will include: Petrochemical Analysis, Emissions Monitoring in air, water and soil, portable and field sampling, oil analysis, calibration, International & Industrial Regulation, standards, Quality Assurance, Measurement Techniques & Technologies. See more at: www.peftec.com

EXHIBITION DATES: 18TH & 19TH November 2015

EXHIBITION VENUE: Antwerp Expo, Jan van Rijswijcklaan 191, 2020 Antwerpen, Belgium

 

We look forward to meeting you there.

Similar Posts

Using a Disposable In-Line Filter to Save Space

Using a Disposable In-Line Filter to Save Space

ByDavid Janes Blog

How can you use a disposable in-line filter to save space? One of our OEM customers uses NN112.201 filter housings for particulate removal in their portable flue gas analysers. These housings offer a low cost, high efficiency solution for stack gas applications and are widely specified. However, for a new gas analyser they found that…

Sample System Filters Offer Flexibility

ByDavid Janes Blog

 In this post we look at the importance of flexibility required when selecting the correct sample system filter. Process analysers continuously measure part of a process stream very accurately. The sample conditioning system is one of the most important issues for process analysis. Many analyser sample systems use a “fast loop” bypass flow to rapidly…

Removing Water from a Diesel Sample with a PTFE Membrane

Removing Water from a Diesel Sample with a PTFE Membrane

ByDavid Janes Blog

One of our OEM customers successfully uses the SML206.221.M8 PTFE Membrane Housing to remove water from a diesel sample system prior to an on-line analyser. Recently a new application required a larger flow rate at lower pressure so we designed a new sized housing for them. The SML304 series uses a larger 89mm diameter PTFE…

New Distributor for Slovenia

New Distributor for Slovenia

ByDavid Janes Blog

We are happy to announce that ECHO d.o.o. have been appointed as our distributor for Slovenia. Located in Slovenske Konjice, they are ready to provide local support for users of Classic Filters products. As with all our distributors, ECHO combine great experience with excellent customer service. This is something we pride ourselves in providing to…

Need a 2nd Outlet Port on CNG Filter Housings? No problem

Need a 2nd Outlet Port on CNG Filter Housings? No problem

ByDavid Janes Blog

A customer requested a special CNG filter housings with two outlet ports. This presented no problem for us as we can make housings with any configuration you can imagine. It’s our flexibility that customers love – if you need something special incorporated into the filter housing design we are happy to help. High Pressure Coalescing Filters With…

Leave a Reply

Your email address will not be published. Required fields are marked *