Our instructions take you though, step by step, how best to install your filter housing and filter element. They also give explanations of the housing labels, as well as information on service intervals and general maintenance such as torque value of the fittings. More
Tag Archives: PTFE-Membrane Filter
Flare Gas Probe Application Video
Have a look at the video of ASaP’s Inclined Fall-back Stokes’ Law Probe. Using the SM106 series PTFE Membrane Housing this Flare Gas Probe solves the problem of plugging and fouling of the probe and keeps the downstream analyser system … More
Genie Filters Alternatives
Need an Alternative for a Genie Filters Housing or Element? Look no further, for your Genie filters alternatives, than Classic Filters. Our products are completely interchangeable with those from Genie Filters® from A+ Corporation®. OEMs and end-users widely acknowledge the advantages of Classic … More
Selecting the Correct Filter Housing for your Application
So you’ve seen our blog on how to choose the right filter element, that we posted last a few weeks ago. Now we are going to explain how to make sure your selecting the correct filter housing for your application. … More
FAQ – SM106 Housing Port Connections
Which port is which on the SM106 series PTFE-membrane housing? We are often asked to clarify about how the ports on our PTFE-membrane housings are connected so we thought it would be a good idea to highlight this on the … More
Missing the Genie Filters® Model 101?
We are often asked about our comparable products to Genie® Filters and always listen to customer needs for alternatives. So what do you need this month? It seems there is a demand for an alternative to the Genie Filters® Model … More
PTFE Membrane Housing – SM105 becomes SM106 series
As part of our company ethos, we like to listen to our customers to gauge feedback on our current products. And as a result of the customer review, we found that some of you had a requirement for a small … More
FLM101 PTFE-Membrane Housing
We are happy to announce that one of the products we have been asked for on a number of occasions, a PTFE-membrane housing for aggressive or demanding environments, is now part of our continued product list. We do manufacture the … More
Should a membrane be supported on one side or on both?
A question that has been asked a lot is when using a membrane as a filter to stop moisture passing, should the membrane be supported on one side or on both? The first thing to look at is the membrane itself. … More
Too Much Liquid on my Membrane – what is the Liquid Block option?
Do you need a Liquid Block option? One of the problems with a PTFE membrane is if it sees too much water, it will eventually breach and allow moisture through to the analyser or piece of equipment being protected. For … More
What is a PTFE Membrane?
Two new PTFE membranes are being introduced – the M3 and M4 oleophobic grades. Based on our proven hydrophobic PTFE membranes the new grades are actually hydrophobic and oleophobic. This means their use will prevent both water and oil carry-over … More
Removing Water from a Diesel Sample with a PTFE Membrane
One of our OEM customers successfully uses the SML206.221.M8 PTFE Membrane Housing to remove water from a diesel sample system prior to an on-line analyser. Recently a new application required a larger flow rate at lower pressure so we designed … More